Prosignia 300 и Red Hat 6.2

Аппаратное обеспечение: PS300/ , 24МБ ОЗУ
ПО: RH6.2, RH6.2 Сетевой загрузочный диск "/images/bootnet.img"

  24576 KB Detected

COMPAQ System BIOS - E15 (08/17/1998)
Copyright 1982,1998 Compaq Computer Corporation. All rights reserved.


Processor running at 150 MHz

SCSI Device Detected - System Board, SCSI ID 0: COMPAQ   M1606S
SCSI Device Detected - System Board, SCSI ID 5: COMPAQ   CRD-254V
SCSI Device Detected - System Board, SCSI ID 6: ARCHIVE  4326XX 27871-XXX

Вставьте дискету /images/bootnet.img и загрузитесь с неё:
                Welcome to Red Hat Linux 6.2!

 o  To install or upgrade a system running Red Hat Linux 2.0
    or later in graphical mode, press the <ENTER> key.

 o  To install or upgrade a system running Red Hat Linux 2.0
    or later in text mode, type: text <ENTER>.

 o  To enable expert mode, type: expert <ENTER>.  Press <F3> for
    more information about expert mode.

 o  To enable rescue mode, type: linux rescue <ENTER>.  Press <F5>
    for more information about rescue mode.

 o  If you have a driver disk, type: linux dd <ENTER>.

 o  Use the function keys listed below for more information.




[F1-Main] [F2-General] [F3-Expert] [F4-Kernel] [F5-Rescue]

boot:

В командной строке загрузки, введите linux text expert mem=24M
boot: linux text expert mem=24M

Welcome to Red Hat Linux:
  • Devices: Insert your driver disk and press "OK" to continue. "OK" "CANCEL" -> "CANCEL"
  • Choose a Language: What language should be used during the installation process? -> English
  • Keyboard Type: What type of keyboard do you have? -> us
  • Installation Method: What type of media contains the packages to be installed? "NFS image" "FTP" "HTTP" -> "FTP"
  • Devices: Which driver should I try?... -> Amd PCnet32
  • Configure TCP/IP: Please enter the IP configuration for this machine. ... -> Use dynamic IP configuration.
  • FTP Setup: FTP site name: emperor
  • FTP Setup: Red Hat directory: pub/RedHat62/i386
  • Devices: I don't have any special device drivers loaded for your system. Would you like to load some now? "DONE" "ADD DEVICE" -> "ADD DEVICE"
  • Devices: What kind of device would you like to add "SCSI" "NETWORK" -> "SCSI"
  • Devices: Which driver should I try? ... -> Symbios/NCR 53C8xx
  • Devices: I have found the following devices in your system: "Symbios/NCR 53C8xx" "DONE" "ADD DEVICE" -> "DONE"


Red Hat Linux (C) 2000 Red Hat, Inc.                                     Welcome
              |----------------| Red Hat Linux |-----------------|
              |                                                  |
              | Welcome to Red Hat Linux!                        |
              |                                                  |
              | This installation process is outlined in detail  |
              | in the Official Red Hat Linux Installation       |
              | Guide available from Red Hat Software.  If you   |
              | have access to this manual, you should read the  |
              | installation section before continuing.          |
              |                                                  |
              | If you have purchased Official Red Hat Linux,    |
              | be sure to register your purchase through our    |
              | web site, http://www.redhat.com/.                |
              |                                                  |
              |          |--|                   |----|           |
              |          |OK|                   |BACK|           |
              |          |--|                   |----|           |
              |                                                  |
              |--------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "OK"

Red Hat Linux (C) 2000 Red Hat, Inc.                           Installation Type
              |--------------| Installation Type |---------------|
              |                                                  |
              | What type of system would you like to install?   |
              |                                                  |
              |          Install GNOME Workstation               |
              |          Install KDE Workstation                 |
              |          Install Server System                   |
              |          Install Custom System                   |
              |          Upgrade Existing Installation           |
              |                                                  |
              |          |--|                   |----|           |
              |          |OK|                   |BACK|           |
              |          |--|                   |----|           |
              |                                                  |
              |--------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "Install Custom System"

Red Hat Linux (C) 2000 Red Hat, Inc.                                   Partition
            |--------------------| Disk Setup |---------------------|
            |                                                       |
            | Disk Druid is a tool for partitioning and setting     |
            | up mount points.  It is designed to be easier to use  |
            | than Linux's traditional disk partitioning software,  |
            | fdisk, as well as more powerful.  However, there are  |
            | some cases where fdisk may be preferred.              |
            |                                                       |
            | Which tool would you like to use?                     |
            |                                                       |
            |    |------------|       |-------|        |------|     |
            |    | Disk Druid |       | fdisk |        | Back |     |
            |    |------------|       |-------|        |------|     |
            |                                                       |
            |-------------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "fdisk"

Red Hat Linux (C) 2000 Red Hat, Inc.                          Manually Partition
        |-----------------------| Disk Setup |------------------------|
        |                                                             |
        | To install Red  Hat Linux, you must have at leaset one      |
        | partition of 150MB dedicated to Linux.  We suggest placing  |
        | that partition on one of the first two hard drives in your  |
        | system so you can boot into Linux with LILO.                |
        |                                                             |
        |                  /dev/sda - Compaq M1606S                   |
        |                                                             |
        |      |------|            |------|            |------|       |
        |      | Done |            | Edit |            | Back |       |
        |      |------|            |------|            |------|       |
        |                                                             |
        |-------------------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "Edit"

Command (m for help):p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda3             1        32     32752   12  Compaq diagnostics

Command (m for help):n
Command action
   e   extended
   p   primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (33-1001, default 33): Press ENTER for default
Using default value 33
Last cylinder or  size or  sizeM or  sizeK (33-1001, default 1001):  30M

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1            33        63     31744   83  Linux
/tmp/sda3             1        32     32752   12  Compaq diagnostics

Command (m for help):a
Partition number (1-4): 1

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1 *          33        63     31744   83  Linux
/tmp/sda3             1        32     32752   12  Compaq diagnostics

Command (m for help):n
Command action
   e   extended
   p   primary partition (1-4)
e
Partition number (1-4): 2
First cylinder (64-1001, default 64): Press ENTER for default
Using default value 64
Last cylinder or  size or  sizeM or  sizeK (64-1001, default 1001): Press ENTER for default
Using default value 1001

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1 *          33        63     31744   83  Linux
/tmp/sda2            64      1001    960512    5  Extended
/tmp/sda3             1        32     32752   12  Compaq diagnostics

Command (m for help):n
Command action
   l   logical (5 or over)
   p   primary partition (1-4)
l
First cylinder (64-1001, default 64): Press ENTER for default
Using default value 64
Last cylinder or  size or  sizeM or  sizeK (64-1001, default 1001):  200M

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1 *          33        63     31744   83  Linux
/tmp/sda2            64      1001    960512    5  Extended
/tmp/sda3             1        32     32752   12  Compaq diagnostics
/tmp/sda5            64       264    205808   83  Linux

Command (m for help):t
Partition number (1-5): 5
Hex code (type L to list codes): 82
Changed system type of partition 5 to 82 (Linux swap)

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1 *          33        63     31744   83  Linux
/tmp/sda2            64      1001    960512    5  Extended
/tmp/sda3             1        32     32752   12  Compaq diagnostics
/tmp/sda5            64       264    205808   82  Linux swap

Command (m for help):n
Command action
   l   logical (5 or over)
   p   primary partition (1-4)
l
First cylinder (265-1001, default 265): Press ENTER for default
Using default value 265
Last cylinder or  size or  sizeM or  sizeK (265-1001, default 1001): Press ENTER for default
Using default value 1001

Command (m for help): p

Disk /tmp/sda: 64 heads, 32 sectors, 1001 cylinders
Units = cylinders of 2048 * 512 bytes

   Device Boot    Start       End    Blocks   Id  System
/tmp/sda1 *          33        63     31744   83  Linux
/tmp/sda2            64      1001    960512    5  Extended
/tmp/sda3             1        32     32752   12  Compaq diagnostics
/tmp/sda5            64       264    205808   82  Linux swap
/tmp/sda6           265      1001    754672   83  Linux


Command (m for help):w
The partition table has been altered!
...

Red Hat Linux (C) 2000 Red Hat, Inc.                          Manually Partition
        |-----------------------| Disk Setup |------------------------|
        |                                                             |
        | To install Red  Hat Linux, you must have at leaset one      |
        | partition of 150MB dedicated to Linux.  We suggest placing  |
        | that partition on one of the first two hard drives in your  |
        | system so you can boot into Linux with LILO.                |
        |                                                             |
        |                  /dev/sda - Compaq M1606S                   |
        |                                                             |
        |      |------|            |------|            |------|       |
        |      | Done |            | Edit |            | Back |       |
        |      |------|            |------|            |------|       |
        |                                                             |
        |-------------------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "Done"

Red Hat Linux (C) 2000 Red Hat, Inc.                                   Partition
|-------------------------| Current Disk Partitions |--------------------------|
|    Mount Point          Device     Requested   Actual         Type           |
|                          sda1          31M       31M      Linux native       |
|                          sda3          31M       31M      Compaq Setup       |
|                          sda5         200M      200M      Linux swap         |
|                          sda6         736M      736M      Linux native       |
|                                                                              |
| Drive Summaries                                                              |
|   Drive      Geom [C/H/S]      Total    Used    Free                         |
|    sda      [ 1001/ 64/32]     1001M   1001M      1M      [##########]       |
|                                                                              |
|          |------|                   |----|                  |------|         |
|          | Edit |                   | Ok |                  | Back |         |
|          |------|                   |----|                  |------|         |
|                                                                              |
|------------------------------------------------------------------------------|
                  F3-Edit                 F12-Ok   v 1.00

Задайте точки монтирования каждого раздела Linux:
  • sda1 -> /boot
  • sda6 -> /

Red Hat Linux (C) 2000 Red Hat, Inc.                                   Partition
|-------------------------| Current Disk Partitions |--------------------------|
|    Mount Point          Device     Requested   Actual         Type           |
|    /boot                 sda1          31M       31M      Linux native       |
|                          sda3          31M       31M      Compaq Setup       |
|                          sda5         200M      200M      Linux swap         |
|    /                     sda6         736M      736M      Linux native       |
|                                                                              |
| Drive Summaries                                                              |
|   Drive      Geom [C/H/S]      Total    Used    Free                         |
|    sda      [ 1001/ 64/32]     1001M   1001M      1M      [##########]       |
|                                                                              |
|          |------|                   |----|                  |------|         |
|          | Edit |                   | Ok |                  | Back |         |
|          |------|                   |----|                  |------|         |
|                                                                              |
|------------------------------------------------------------------------------|
                  F3-Edit                 F12-Ok   v 1.00
-> "Ok"

Red Hat Linux (C) 2000 Red Hat, Inc.                                        Swap
              |-----------------| Low Memory |------------------|
              |                                                 |
              | As you don't have much memory in this machine,  |
              | we need to turn on swap space immediately. To   |
              | do this we'll have to write your new partition  |
              | table to the disk immediately. Is that okay?    |
              |                                                 |
              |         |-----|                 |----|          |
              |         | Yes |                 | No |          |
              |         |-----|                 |----|          |
              |                                                 |
              |-------------------------------------------------|

  <Tab>/<Alt-Tab> between elements   |  <Space> selects   |  <F12> next screen
-> "Yes"



Форматирование файловой системы:
  • Choose Partitions to Format: what partitions would you like to format? ... -> select all partitions.
  • "OK"


Настройка LILO:
  • LILO Configuration: A few systems will need to pass special options to the kernel at boot time for the system to function properly. If yo need to pass boot options to the kernel, enter them now. If you don't need any or aren't sure, leave this blank. -> turn off linear mode, add the following:
    mem=24M
  • "OK"

  • LILO Configuration: Where do you want to install the bootloader? "MBR" "First sector of boot partition" -> First sector of boot partition
  • "OK"

  • LILO Configuration: The boot manager Red Hat uses can boot other operating systems as well. You need to tell me what partitions you would like to be able to boot and what label you want to use for each of them. -> "OK"


Установка имя хост-системы:
  • Hostname Configuration: Hostname: -> ps300rh62.mydomain.com
  • "OK"


Настройка мыши:
  • Mouse Selection: -> Generic - 2 Button Mouse (PS/2), Enable Emulate 3 Buttons


Настройка временной зоны:
  • Time Zone Selection: -> US/Central


Пароль root:
  • Root Password: -> xxxxx
  • Root Password (again): -> xxxxx
  • -> "OK"


Настройка учётной записи пользователя:
  • Add User: -> testuser testuser xxxxx xxxxx
  • -> "OK"


  • User Account Setup: -> "OK"


Аутентификация:
  • Authentication Configuration: -> "OK"


Группы пакетов:
  • Package Group Selection -> "Kernel Development"
  • -> "OK"


X конфигурация:
  • Video Card Selection: Which video card do you have? -> Unlisted Card
  • X Server Selection: Choose a server -> SVGA


Начало установки:
  • Installation to begin: A complete log of your installation will be in /tmp/install.log after rebooting yoru system. You may want to keep this file for later reference. "OK" "BACK" -> "OK"
  • 302 packages, 360MB, Total Time for File Copy=42 minutes


Загрузочный диск:
  • Bootdisk: A custom boot disk provides a way of booting into your Linux system without depending on the normal bootloader. ... Would you like to create a boot disk for your system? -> "YES"
  • Bootdisk: Insert a blank floppy in the first floppy drive. All data on this disk will be erased during creation of the boot disk. -> "OK"


Xconfigurator 4.3.5:
  • Monitor Setup: What type of monitor do you have? -> "CUSTOM"
  • Custom Monitor Setup: Now we want to set the specifications of the monitor. ... -> "OK"
  • Custom Monitor Setup (Continued): You must indicate the horizontal sync range of your monitor. ... -> "Non-Interlaced SVGA, 1024X768 @ 60 Hz, 800x600 @ 72 Hz"
  • Custom Monitor Setup (Continued): You must indicate the vertical sync range of your monitor. ... -> "50-90"
  • Screen Configuration: Xconfigurator now needs to setup the default resolution and color depth. ... -> "PROBE"
  • Probing to begin: Xconfigurator will now run the X server you selected to probe various information about your video card. It is normal for the screen to blink several times. -> "OK"
  • Probing finished:
    Xconfigurator has successfully probed your video card.  The default video mode will be:
    
    Color Depth: 8 bits per pixel
    Resolution : 800x600
    
    Do you want to accept this setting, or select for yourself?
    "USE DEFAULT" "LET ME CHOOSE" "BACK"
    
    -> "USE DEFAULT"
  • Starting X: Xconfigurator will now start X to test your configuration. "OK" "SKIP" -> "OK"
  • Can you see this message? Automatic timeout in 10 seconds. "YES" "NO" -> "YES"
  • Xconfigurator can set up you computer to automatically start X upon booting. Would you like X to start when you reboot? "YES" "NO" -> "NO"


Installation Complete:
Red Hat Linux (C) 2000 Red Hat, Inc.                       Installation Complete

                                    Complete:

                Congratulations, installation is complete.

                Press return to reboot, and be sure to remove
                your boot medium as the system reboots, or your
                system will return to the install. For information
                on fixes which are available for this release
                of Red Hat Linux, consult the Errata available
                from http://www.redhat.com/errata.

                Information on configuring and using your red
                Hat Linux system is contained in the Red Hat
                Linux manuals.
                                     "OK"

-> "OK"
install exited abnormally -- received signal 11
sending termination signals...done
sending kill signals...done
disabling swap...
        /tmp/swap/sda5
unmounting filesystems...
        /mnt/runtime
        /dev/pts
        /proc
you may safely reboot your system

"Reboot"
24576 KB Detected

COMPAQ System BIOS - E15 (08/17/1998)
Copyright 1982,1998 Compaq Computer Corporation. All rights reserved.


Processor running at 150 MHz

SCSI Device Detected - System Board, SCSI ID 0: COMPAQ   M1606S
SCSI Device Detected - System Board, SCSI ID 5: COMPAQ   CRD-254V
SCSI Device Detected - System Board, SCSI ID 6: ARCHIVE  4326XX 27871-XXX

Press  "F10" key for System Partition Utilities

Missing operating system

Загрузочный диск отработал корректно. Возможно повреждена MBR, запустите "fdisk /mbr" загрузочного диска Win95.
Если не поможет fdisk /mbr, проверьте, помечен ли /boot активным.
Если /boot помечен активным - помещаем LILO снова на /boot.
Проверьте /etc/lilo.conf, быстрее всего следующая строка не верна:
boot=/dev/sda6
Она должна выглядеть:
boot=/dev/sda1
Измените строку и перезапустите /sbin/lilo -v.
Система теперь запустится с жёсткого диска (LILO:)


Поиск по сайту в FreeFind!:
Поиск в Google!:

WWW cpqlinux.com

Текущее положение:
Вернуться на главную: www.cpqlinux.com

Автор:
Ричард "Черный" (Richard Black)
Контакты: contact.html


Сайт создан в: 9/20/1999